 |
 |
 |
|
Service Caster Corporation Presents: Roll-Tech's VSP (tm) wheel assembly with solid rubber tire. Perfect for hand trucks, carts, tilt trucks, portable equipment, etc. Puncture-proof (never needs air), cushioned ride, resilient and quiet. Terrific life expectancy. Great replacement for Pneumatic (inner tube/air-filled) tires that cost you money and time repairing flats.
8" x 2-1/2" black, solid rubber tire on rugged polypropylene hub.
Tread measures 2".
2-1/2" centered hub complete with ball bearings.
Load capacity = 440 lbs.
Durometer 70-75 (Shore A)
Available in 1/2", 5/8", and 3/4" bore sizes.
Flat-free wheel, puncture-proof, never needs air; will not flatten under load or absorb moisture.
Made In USA
Make sure to check your hub type before ordering. Centered hub will protrude evenly from both sides of the wheel and an offset hub will primarily be visible from one side. Typically cenetered hubs are used on casters, while offset hubs are found on 2 wheel hand trucks. Below is an exaggerated illustration with the hub shown in blue. Please email or call if you have further questions.
|
|
|
 |
|
 |
|