Home > Hand Truck Wheels >

Flat Free Dolly Hand Truck Wheel 10" x 2.75" - 2.25" Offset Hub
648-267 Offset Hub Hand Truck Wheels


 
Alternative Views:


Our Price: $18.45

Availability: Usually Ships in 1 to 2 Business Days
Product Code: 648-254-1X30

Bearing Size

1/2" Precision Bearing
3/4" Precision Bearing
5/8" Precision Bearing

Qty:  
Description
 
Service Caster Corporation Presents: Roll-Tech's VSP (tm) wheel assembly with solid rubber tire. Perfect for hand trucks, carts, tilt trucks, portable equipment, etc. Puncture-proof (never needs air), cushioned ride, resilient and quiet. Terrific life expectancy. Great replacement for Pneumatic (inner tube/air-filled) tires that cost you money and time repairing flats. Made in USA.

Replaces: Wesco Z2; Harper WH60; B&P D2; RWM SN2

550 Pound Capacity per Wheel

Available in 1/2", 5/8", and 3/4" Bore Sizes


Make sure to check your hub type before ordering. Centered hub will protrude evenly from both sides of the wheel and an offset hub will primarily be visible from one side. Typically centered hubs are used on casters, while offset hubs are found on 2 wheel hand trucks. Below is an exaggerated illustration with the hub shown in blue. Please email or call if you have further questions.


Average Rating: 5 of 5 Total Reviews: 9 Write a review »

  0 of 0 people found the following review helpful:
 
Purchase of Flat Free Hand Truck Wheel September 24, 2015
Reviewer: M.W. Quanbeck from Montana  
Wheels are of good quality.  The price was very reasonable.  Delivery was fast and shipping was free.  Enjoyed an excellent shopping experience with Service Caster Corporation.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Perfect Wheels September 24, 2015
Reviewer: Kathleen Oxford from Loveland, CO United States  
fast shipping perfect fit

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
wheels September 24, 2015
Reviewer: Gerhard Feyer from Spring Hill, FL United States  
Very good service and material.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Best I've had. September 24, 2015
Reviewer: Bruce Danielson from Cedar Rapids, IA United States  
I wheel around 500lbs on a 2-wheel hand truck. I installed these wheels and they have decreased my exertion level by half. The bearings are good. They fit snug on the axle, so no wobbling. They are strong, yet not too heavy, adding little weight to the truck. The rubber is good, the tread is good, and they are perfectly round. Very happy. And the delivery was quick.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Purchase Satisfaction September 24, 2015
Reviewer: Michael Larson from Walton, KY United States  
Reasonably priced, excellent quality, & prompt delivery

Was this review helpful to you?

View All Customer Reviews